O2Go & AirGo Oxygen Valves

Compact. Lightweight. Reliable.

Our O2Go and AirGo valves are designed for performance, durability and ease of use in our demanding medical environments.

Key Features

Ultra-compact design

Among the most compact and lightweight units on the market – weighing as little as 1.9 pounds

Durable Materials

Constructed from anodized aluminum for strength and longevity.

Flow Rate Options

11 flow rates setting available – from 0.03 LPM to 25 LPM – with clear, easy-to-read deals.

FDA, CGA, & ISO Compliant

Manufactured to meet ISO 9001:2015, CGA, and FDA quality standards.

MR Conditional – 7 (Optional)

Models available for use in MRI environments up to 3.0 Tesla (3T). MR Conditional – 7 per ASTM 2503 – 20 (not intended for use inside MR system during scanner operation / MR procedure. Device should not be inside MR system bore or exposed to time varying and RF field present during MR procedure.)

Easy Cylinder Mounting

Compatible with standard aluminum cylinders.

Simple Filling and Evacuating

CGA540 fill port with dual biased check valve makes vacuum to filling seamless

Dual use DISS outlet (Optional)

50 PSI (110 LPM) outlet can power portable pressure ventilators and other pneumatically operated equipment on the go

Built in safety

ASTM-G175 ignition sensitivity testing certified along with an integrated rupture disc for peace of mind.

Why Choose the O2Go & AirGo

Proven performance in EMS, hospital, homecare, and pediatric environments

Halo handle for easy carrying and protection

Every Unit is 100% tested before leaving the factory

2-year limited warranty

Warning

Important information before install

O2GO’s should be installed by trained personnel only.
Before Installation, verify the unit and cylinder are free from any debris - have no visible damage - and are cleaned for oxygen service.
Always start installation by hand to prevent "cross-threading" the valve with the cylinder.
Verify that there is a white Teflon ring located at the base of the O2GO unit.
Installer MUST use a certified-torque wrench set to a MAXIMUM of 85ft/lb. DO NOT OVER TORQUE VALVE. OVER-TORQUING VALVE COULD CAUSE THE VALVE TO FAIL OR SHEER DURING PRESSURE CAUSING INJURY OR DEATH. TORQUE WRENCH SHOULD BE RE-CALIBERATED AND CHECKED FREQUENTLY IN ACCORDANCE WITH THE MANUFACTURER’S SPECIFICATIONS.

Cylinder Compatibility

Available for installation on Standard aluminum cylinders in M6, M9, D, and E sizes

Cylinder Size	Capacity	PSI	Weight
M6	6 cu.ft	2216	2.3 lbs.
M9	9 cu.ft	2015	3.7 lbs.
D	15 cu.ft	2015	5.3 lbs.
E	24 cu.ft	2015	7.8 lbs.